Features
Remote multi-use holding coolers, with air defrost. Glass doors 30"
x 63" doors with mullion lighting (2 pane cooler, 3 pane freezer),
black frame standard for finished door.
Forced air, top coil design, with stainless or painted front (excluding
kick panel). Complete with adjustable wire shelves. Add approximately
5" to length for one pair of ends (not included). Valence included
upon request. (Add 9" to height if valence is included). BTH/HR:
550 to 650 per linear foot @ 20 degree F. Suction temperature. SVC4
shown at left.
Click here for a list of accessories
Terms, Conditions and Warranty
Information
Don't see
what you need? Many other sizes are available upon request. Give us
a call!
Cabinet & Finishes:
White pre-painted galvanized metal in and out. Interior floor galvanized.
3" Foamed in place high density polyurethane foamed cabinet, with
R-Value of 24. Finish Options: Embossed white, Stainless (flat or embossed),
Aluminum (flat or embossed), Standard and Custom colors.
Doors & Gaskets:
Black aluminum thermal pane Cooler doors and triple pane heated Freezer
doors and frame, self-closing doors with spring loaded positive closing
hinges and hold open feature. Easily removable closed cell magnetic
self adjusting gasket. Optional keyed door locks and glass ends. Cabinet
design allows for flangeless continuous run.
Lights:
Standard vertical mullion fluorescent fixtures on all glass door models.
VHO on freezers.
Shelves:
Standard with 5 rows of adjustable, (1/2" increments). Flat epoxy
coated wire shelves for durability and cleanliness. Optional divided
wire shelves for beverages on Cooler. Optional adjustable galvanized
or stainless steel tray slides.
Controls & Monitors:
Standard Electronic Temperature Control with Digital readout. Options:
Chart Recorder, Power light and Switch, Defrost indicator, Dial and
Digital thermometers, Temperature alarm with Digital readout and dialer
output.
Refrigeration System:
Remote systems with Top interior mounted efficient forced air evaporator.
Standard electric defrost on Freezers. Standard with TX valve, and Fan
Delay switch with defrost termination. Systems are designed for use
in environments, 75 deg. F & 55% RH. Systems designed for holding
pre-chilled/frozen product. Remote systems require remotely mounted
condensing units and condensate drain. CSA/UL or ETL, NSF pending. |